SVB Components LLP

ATmega8A is a low-power, high-performance 8-bit microcontroller based on the AVR RISC architecture, manufactured by Microchip Technology (originally developed by Atmel). It is widely used in embedded systems, automation projects, industrial control, and consumer electronics due to its reliability, ease of programming, and cost-effectiveness.

Special Microcontroller Features

• Power-on Reset and Programmable Brown-out Detection
• Internal Calibrated RC Oscillator
• External and Internal Interrupt Sources
• Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and Standby

Core • 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline • Extended instruction set Memories • Program memory: 8 Kbyte Flash memory; data retention 20 years at 55 °C after 100 cycles • RAM: 1 Kbyte • Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles Clock, reset and supply management • 2.95 V to 5.5 V operating voltage • Flexible clock control, 4 master clock sources – Low-power crystal resonator oscillator – External clock input – Internal, user-trimmable 16 MHz RC – Internal low-power 128 kHz RC • Clock security system with clock monitor • Power management – Low-power modes (wait, active-halt, halt) – Switch-off peripheral clocks individually – Permanently active, low-consumption power-on and power-down reset 

Special Microcontroller Features:
• 1,000 erase/write cycle FLASH program memory typical
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
• Programmable code protection • Power saving SLEEP mode
• Selectable oscillator options
• In-Circuit Serial Programming™ (ICSP™) via 2 pins
• Processor read access to program memory

Special Microcontroller Features – Power-on Reset and Programmable Brown-out Detection – Internal Calibrated Oscillator – External and Internal Interrupt Sources – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby

High-Performance Modified RISC CPU:
• Modified Harvard architecture
• C compiler optimized instruction set architecture
• 83 base instructions with flexible addressing modes
• 24-bit wide instructions, 16-bit wide data path
• 12 Kbytes on-chip Flash program space
• 512 bytes on-chip data RAM
• 1 Kbyte nonvolatile data EEPROM
• 16 x 16-bit working register array
• Up to 30 MIPs operation: - DC to 40 MHz external clock input - 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
• 27 interrupt sources
• Three external interrupt sources
• 8 user-selectable priority levels for each interrupt
• 4 processor exceptions and software traps

Special Microcontroller Features:
• Internal and External Oscillator Options - Precision Internal 4 MHz oscillator factory calibrated to ±1% - External Oscillator support for crystals and resonators - 5 s wake-up from Sleep, 3.0V, typical
• Power-Saving Sleep mode
• Wide Operating Voltage Range – 2.0V to 5.5V
• Industrial and Extended Temperature Range
• Low-Power Power-on Reset (POR)
• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST

Features
• High-performance, Low-power Microchip AVR® 8-bit Microcontroller
• Advanced RISC Architecture - 130 Powerful Instructions – Most Single-clock Cycle Execution - 32 x 8 General Purpose Working Registers - Fully Static Operation - Up to 16MIPS Throughput at 16MHz - On-chip 2-cycle Multiplier

PIC PIC® 16F Microcontroller IC 8-Bit 20MHz 7KB (4K x 14) FLASH 28-SPDIP

PIC PIC 16F886-I/Sp Microcontroller IC 8-Bit 20MHz 14KB (8K x 14) FLASH 28-SPDIP

Special Microcontroller Features: • Internal and External Oscillator Options - Precision Internal 4 MHz oscillator factory calibrated to ±1% - External Oscillator support for crystals and resonators - 5 s wake-up from Sleep, 3.0V, typical • Power-Saving Sleep mode • Wide Operating Voltage Range – 2.0V to 5.5V • Industrial and Extended Temperature Range • Low-Power Power-on Reset (POR) • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

Features • High-performance, Low-power AVR® 8-bit Microcontroller • Advanced RISC Architecture – 133 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers + Peripheral Control Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier • High Endurance Non-volatile Memory segments – 128K Bytes of In-System Self-programmable Flash program memory – 4K Bytes EEPROM – 4K Bytes Internal SRAM – Write/Erase cycles: 10,000 Flash/100,000 EEPROM – Data retention: 20 years at 85°C/100 years at 25°C(1) – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – Up to 64K Bytes Optional External Memory Space – Programming Lock for Software Security – SPI Interface for In-System Programming

Special Microcontroller Features: • Internal and External Oscillator Options - Precision Internal 4 MHz oscillator factory calibrated to ±1% - External Oscillator support for crystals and resonators - 5 s wake-up from Sleep, 3.0V, typical • Power-Saving Sleep mode • Wide Operating Voltage Range – 2.0V to 5.5V • Industrial and Extended Temperature Range • Low-Power Power-on Reset (POR) • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

Special Microcontroller Features:• Operating Voltage Range: 1.8V to 5.5V• On-Chip 3.3V Regulator• Operating Speed up to 64 MHz• Up to 128 Kbytes On-Chip Flash Program Memory• Data EEPROM of 1,024 Bytes• 4K x 8 General Purpose Registers (SRAM)• 10,000 Erase/Write Cycle Flash Program Memory, Typical• 1,000,000 Erase/write Cycle Data EEPROM Memory, Typical

The AT89S52 is a low-power, high-performance CMOS 8-bit microcontroller with 8K bytes of in-system programmable Flash memory. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard 80C51 instruction set and pinout. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with in-system programmable Flash on a monolithic chip, the Atmel AT89S52 is a powerful microcontroller which provides ahighly-flexible and cost-effective solution to many embedded control applications. The AT89S52 provides the following standard features: 8K bytes of Flash, 256 bytes of RAM, 32 I/O lines, Watchdog timer, two data pointers, three 16-bit timer/counters, a six-vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator, and clock circuitry. In addition, the AT89S52 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port, and interrupt system to continue functioning. The Power-down mode saves the RAM contents but freezes the oscillator, disabling all other chip functions until the next interrupt or hardware reset.

AVR® ATmega Microcontroller IC 8-Bit 16MHz 16KB (8K x 16) FLASH 40-PDIP

Special Microcontroller Features
– debugWIRE On-chip Debugging
– In-System Programmable via SPI Port
– External and Internal Interrupt Sources
– Low-power Idle, Power-down, and Standby Modes
– Enhanced Power-on Reset Circuit
– Programmable Brown
-out Detection Circuit
– Internal Calibrated Oscillator

Special Microcontroller Features: • 4 MHz precision internal oscillator: - Factory calibrated to ±1% • In-Circuit Serial Programming™ (ICSP™) • In-Circuit Debugging (ICD) support • Power-on Reset (POR) • Device Reset Timer (DRT) • Watchdog Timer (WDT) with dedicated on-chip RC oscillator for reliable operation • Programmable code protection • Multiplexed MCLR input pin • Internal weak pull-ups on I/O pins • Power-saving Sleep mode • Wake-up from Sleep on pin change • Selectable oscillator options:

The AT89C2051 is a low-voltage, high-performance CMOS 8-bit microcomputer with 2K bytes of Flash programmable and erasable read-only memory (PEROM). The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C2051 is a powerful microcomputer which provides a highly-flexible and cost-effective solution to many embedded control applications.

Special Microcontroller Features: • Precision Internal Oscillator: - Factory calibrated to ±1% - Software selectable frequency range of 8 MHz to 31 kHz - Software tunable - Two-Speed Start-up mode - Crystal fail detect for critical applications - Clock mode switching during operation for power savings • Power-Saving Sleep mode • Wide operating voltage range (2.0V-5.5V) • Industrial and Extended Temperature range • Power-on Reset (POR) • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Brown-out Reset (BOR) with software control option • Enhanced low-current Watchdog Timer (WDT) with on-chip oscillator (software selectable nominal 268 seconds with full prescaler) with software enable

Special Microcontroller Features: • 2.3V to 5.5V Operation – PIC18FXXK22 devices • 1.8V to 3.6V Operation – PIC18LFXXK22 devices • Self-Programmable under Software Control • High/Low-Voltage Detection (HLVD) module: - Programmable 16-Level - Interrupt on High/Low-Voltage Detection • Programmable Brown-out Reset (BOR): - With software enable option - Configurable shutdown in Sleep

Special Microcontroller Features:
• Precision Internal Oscillator: - Factory calibrated to ±1%, typical - Software selectable frequency range from 32 MHz to 31 kHz
• Power-Saving Sleep mode
• Power-on Reset (POR)
•Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Brown-out Reset (BOR): - Selectable between two trip points - Disable in Sleep option
• Multiplexed Master Clear with Pull-up/Input Pin

FeaturesCore•16 MHz advancedSTM8core with Harvardarchitectureand 3-stagepipeline•ExtendedinstructionsetMemories•Medium-densityFlash/EEPROM:-Programmemory:32 Kbytesof Flashmemory;data retention20 yearsat 55°Cafter 100 cycles-Datamemory:128 bytesof true dataEEPROM;enduranceup to 100 k write/erasecycles•RAM:2 KbytesClock,resetand supplymanagement•2.95 V to 5.5 V operatingvoltage•Flexibleclockcontrol,4 masterclocksources:-Low powercrystalresonatoroscillator-Externalclockinput-Internal,user-trimmable16 MHz RC-Internallow power128 kHz RC•Clocksecuritysystemwith clockmonitor•Powermanagement:-Low powermodes(wait,active-halt,halt)-Switch-off peripheralclocksindividually

Special Microcontroller Features:
• C compiler optimized architecture: - Optional extended instruction set designed to optimize re-entrant code • 100,000 erase/write cycle Enhanced Flash program memory typical
• 1,000,000 erase/write cycle Data EEPROM memory typical
• Flash/Data EEPROM Retention: 100 years typical
• Self-programmable under software control
• Priority levels for interrupts
• 8 x 8 Single-Cycle Hardware Multiplier

The AT89S52-24AU is a low-power, high-performance CMOS 8-bit microcontroller with 8K bytes of in-system programmable Flash memory. The device is manufactured using Atmel's high-density nonvolatile memory technology and is compatible with the indus- try-standard 80C51 instruction set and pinout.

Special Microcontroller Features:• Internal and external oscillator options- Precision Internal 4 MHz oscillator factorycalibrated to ±1%- External Oscillator support for crystals andresonators- 5 μs wake-up from SLEEP, 3.0V, typical• Power saving SLEEP mode• Wide operating voltage range - 2.0V to 5.5V• Industrial and Extended temperature range• Low power Power-on Reset (POR)• Power-up Timer (PWRT) and Oscillator Start-upTimer (OST)• Brown-out Detect (BOD)

C Compiler Optimized Architecture• Only 49 Instructions• Up to 8 Kwords Linear Program Memory Addressing• Up to 512 bytes Linear Data Memory Addressing• Operating Speed:- DC – 20 MHz clock input- DC – 200 ns instruction cycle• Interrupt Capability with Automatic Context Saving• 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset• Direct, Indirect and Relative Addressing modes:- Two full 16-bit File Select Registers (FSRs)- FSRs can read program and data memory

8-bit Microcontrollers - MCU 20K FLASH - 24MHZ IND TEMP 5V

PIC PIC® 16F Microcontroller IC 8-Bit 20MHz 14KB (8K x 14) FLASH 40-PDIP. We, SVB Components LLP, established in year 2011. We are coveted organization, engaged in Semiconductors Components distribution. Our headquarter is situated at Mumbai with expanded network of local sales offices all over India.

8-bit Microcontrollers - MCU 3.5KB FL 128B RAM 12I/O 10-bit ADC. We, SVB Components LLP, established in year 2011. We are coveted organization, engaged in Semiconductors Components distribution. Our headquarter is situated at Mumbai with expanded network of local sales offices all over India.

PIC PIC® 16F Microcontroller IC 8-Bit 20MHz 3.5KB (2K x 14) FLASH 28-SPDIP

PIC PIC® 12F Microcontroller IC 8-Bit 8MHz 1.5KB (1K x 12) FLASH 8-PDIP. We, SVB Components LLP, established in year 2011. We are coveted organization, engaged in Semiconductors Components distribution. Our headquarter is situated at Mumbai with expanded network of local sales offices all over India.

The STM8S003F3/K3 value line 8-bit microcontrollers offer 8 Kbytes of Flash program memory, plus integrated true data EEPROM. They are referred to as low-density devices in the STM8S microcontroller family reference manual (RM0016). The STM8S003F3/K3 value line devices provide the following benefits: performance, robustness and reduced system cost. Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system. The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset.

Special Microcontroller Features: • Precision Internal Oscillator: - Factory calibrated to ±1% - Software selectable frequency range of 8 MHz to 31 kHz - Software tunable - Two-Speed Start-up mode - Crystal fail detect for critical applications - Clock mode switching during operation for power savings • Power-Saving Sleep mode • Wide operating voltage range (2.0V-5.5V) • Industrial and Extended Temperature range • Power-on Reset (POR) • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Brown-out Reset (BOR) with software control option